Before you begin installing the cable, you of course need to know what it is?
The Category 6 ethernet cable is an enhanced version of the Cat5e Cable with a data transfer speed of up to 1 Gbps over a length of 100 meters and 550 MHz bandwidth. It features four twisted pairs of 23 AWG conductors that are shielded in the STP cables and unshielded in UTP cables. The STP variants are more resilient towards EMI and crosstalk as compared to their UTP counterparts.
So, Cat6 cable is used in both commercial and domestic buildings to send data across various electronic devices in a local area network (LAN).
It is the most sought-after network cable in the industry. As mentioned, it provides gigabit data transmission speeds and a whopping 550 MHz bandwidth – more than enough for all high-performance ethernet applications. So, when installing the Cat6 cable 1000ft, its performance is the last thing you need to worry about.
The cable comes in three different types of jackets. When installing the cable, you need to make sure you are installing the cable with the right jacket in the right place. The following are the types of cable jackets. For your convenience, we will also look into the spaces they are designed for installation.
Plenum: A plenum Jacket is also known as a communications multipurpose plenum (CMP).
It is made out of top-of-the-line materials that are resistant to fire, heat, water, and light. Therefore, a cable that comes with this jacket can be installed anywhere. But due to its top-notch safety features, it costs more than its other counterparts. And most of the time, it is installed in indoor plenum spaces which are indoor spaces with free air circulation such as raised floors, dropped ceilings, etc.
Riser: Also known as a communications multipurpose riser, cat6 cables that come with this jacket are installed in indoor riser spaces and outdoors. A riser space, as the term suggests, is an indoor rising space that is enclosed. Examples of riser spaces are elevator shafts, the inside of walls, and the space between floors. It is particularly designed to prevent fire from spreading from one floor to another.
PVC: This cable jacket is a budget option and it is installed in outdoor spaces. If you need to run a cable from a building to an outdoor ATM machine or for any outdoor use purpose, this is the jacket you should get your cable with.
The Cat6 cable comes with two different types of conductors. Both are fairly easy to install. Bare Copper is the most popular conductor and copper-clad aluminum is the second option that you can get. However, note that stranded conductor cables are more flexible and easily bendable, which makes them particularly easy to install in indoor spaces.
Before you even begin to install the bulk Cat6 ethernet cable, you should know what ethernet networking accessories it is compatible with and which accessories it is not. If you need the cable for a domestic LAN network, it is the ideal cable to install at your home. And if you need it for commercial use, it is also compatible with all modern electronic equipment.
Moreover, if you get it with a bare copper conductor, you can also use it for PoE. POE+, and PoE++ connections. It is also backward compatible with previous generations of ethernet cables so you do not have to worry about it. Furthermore, know that it follows the EIA/TIA 568A and B wiring protocols, so, all of your ethernet accessories that follow the same protocol as the Cat6 cable, you can install without hesitating.
Before you even buy Cat6 cable 1000ft, you need to know what it is and what it is compatible with. Then you will have to consider the above-mentioned properties before you install the cable.
By continuing to use the site you agree to our privacy policy Terms and Conditions.
